Deployment options

The default Zulip installation instructions will install a complete Zulip server, with all of the services it needs, on a single machine.

For production deployment, however, it's common to want to do something more complicated. This page documents the options for doing so.

Installing Zulip from Git

To install a development version of Zulip from Git, just clone the Git repository from GitHub:

# First, install Git if you don't have it installed already
sudo apt install git
git clone https://github.com/zulip/zulip.git zulip-server-git

and then continue the normal installation instructions. You can also upgrade Zulip from Git.

The most common use case for this is upgrading to master to get a feature that hasn't made it into an official release yet (often support for a new base OS release). See upgrading to master for notes on how master works and the support story for it, and upgrading to future releases for notes on upgrading Zulip afterwards.

In particular, we are always very glad to investigate problems with installing Zulip from master; they are rare and help us ensure that our next major release has a reliable install experience.

Zulip in Docker

Zulip has an officially supported, experimental docker image. Please note that Zulip's normal installer has been extremely reliable for years, whereas the Docker image is new and has rough edges, so we recommend the normal installer unless you have a specific reason to prefer Docker.

Advanced installer options

The Zulip installer supports the following advanced installer options as well as those mentioned in the install documentation:

Installing on an existing server

Zulip's installation process assumes it is the only application running on the server; though installing alongside other applications is not recommended, we do have some notes on the process.

Running Zulip's service dependencies on different machines

Zulip has full support for each top-level service living on its own machine.

You can configure remote servers for PostgreSQL, RabbitMQ, Redis, in /etc/zulip/settings.py; just search for the service name in that file and you'll find inline documentation in comments for how to configure it.

Since some of these services require some configuration on the node itself (e.g. installing our PostgreSQL extensions), we have designed the Puppet configuration that Zulip uses for installing and upgrading configuration to be completely modular.

For example, to install a Zulip Redis server on a machine, you can run the following after unpacking a Zulip production release tarball:

env PUPPET_CLASSES=zulip::profile::redis ./scripts/setup/install

All puppet modules under zulip::profile are allowed to be configured stand-alone on a host. You can see most likely manifests you might want to choose in the list of includes in the main manifest for the default all-in-one Zulip server, though it's also possible to subclass some of the lower-level manifests defined in that directory if you want to customize. A good example of doing this is in the zulip_ops Puppet configuration that we use as part of managing chat.zulip.org and zulip.com.

Using Zulip with Amazon RDS as the database

You can use DBaaS services like Amazon RDS for the Zulip database. The experience is slightly degraded, in that most DBaaS provides don't include useful dictionary files in their installations and don't provide a way to provide them yourself, resulting in a degraded full-text search experience around issues dictionary files are relevant (e.g. stemming).

You also need to pass some extra options to the Zulip installer in order to avoid it throwing an error when Zulip attempts to configure the database's dictionary files for full-text search; the details are below.

Step 1: Set up Zulip

Follow the standard instructions, with one change. When running the installer, pass the --no-init-db flag, e.g.:

sudo -s  # If not already root
./zulip-server-*/scripts/setup/install --certbot \
    --email=YOUR_EMAIL --hostname=YOUR_HOSTNAME \
    --no-init-db --postgresql-missing-dictionaries

The script also installs and starts PostgreSQL on the server by default. We don't need it, so run the following command to stop and disable the local PostgreSQL server.

sudo service postgresql stop
sudo update-rc.d postgresql disable

This complication will be removed in a future version.

Step 2: Create the PostgreSQL database

Access an administrative psql shell on your PostgreSQL database, and run the commands in scripts/setup/create-db.sql to:

Depending on how authentication works for your PostgreSQL installation, you may also need to set a password for the Zulip user, generate a client certificate, or similar; consult the documentation for your database provider for the available options.

Step 3: Configure Zulip to use the PostgreSQL database

In /etc/zulip/settings.py on your Zulip server, configure the following settings with details for how to connect to your PostgreSQL server. Your database provider should provide these details.

If you're using password authentication, you should specify the password of the zulip user in /etc/zulip/zulip-secrets.conf as follows:

postgres_password = abcd1234

Now complete the installation by running the following commands.

# Ask Zulip installer to initialize the PostgreSQL database.
su zulip -c '/home/zulip/deployments/current/scripts/setup/initialize-database'

# And then generate a realm creation link:
su zulip -c '/home/zulip/deployments/current/manage.py generate_realm_creation_link'

Using an alternate port

If you'd like your Zulip server to use an HTTPS port other than 443, you can configure that as follows:

  1. Edit EXTERNAL_HOST in /etc/zulip/settings.py, which controls how the Zulip server reports its own URL, and restart the Zulip server with /home/zulip/deployments/current/scripts/restart-server.

  2. Add the following block to /etc/zulip/zulip.conf:

    ini [application_server] nginx_listen_port = 12345

  3. As root, run /home/zulip/deployments/current/scripts/zulip-puppet-apply. This will convert Zulip's main nginx configuration file to use your new port.

We also have documentation for a Zulip server using HTTP for use behind reverse proxies.

Using an outgoing HTTP proxy

Zulip supports routing all of its outgoing HTTP and HTTPS traffic through an HTTP CONNECT proxy, such as Smokescreen; this includes outgoing webhooks, image and website previews, and mobile push notifications. You may wish to enable this feature to provide a consistent egress point, or enforce access control on URLs to prevent SSRF against internal resources.

To use Smokescreen:

  1. Add , zulip::profile::smokescreen to the list of puppet_classes in /etc/zulip/zulip.conf. A typical value after this change is: ini puppet_classes = zulip::profile::standalone, zulip::profile::smokescreen

  2. Optionally, configure the smokescreen ACLs. By default, Smokescreen denies access to all non-public IP addresses, including 127.0.0.1.

  3. Add the following block to /etc/zulip/zulip.conf, substituting in your proxy's hostname/IP and port:

    ini [http_proxy] host = 127.0.0.1 port = 4750

  4. If you intend to also make the Smokescreen install available to other hosts, set listen_address in the same block. Note that you must control access to the Smokescreen port if you do this, as failing to do so opens a public HTTP proxy!

  5. As root, run /home/zulip/deployments/current/scripts/zulip-puppet-apply. This will compile and install Smokescreen, reconfigure services to use it, and restart Zulip.

If you would like to use an already-installed HTTP proxy, omit the first step, and adjust the IP address and port in the second step accordingly.

Putting the Zulip application behind a reverse proxy

Zulip is designed to support being run behind a reverse proxy server. This section contains notes on the configuration required with variable reverse proxy implementations.

Installer options

If your Zulip server will not be on the public Internet, we recommend, installing with the --self-signed-cert option (rather than the --certbot option), since CertBot requires the server to be on the public Internet.

Configuring Zulip to allow HTTP

Depending on your environment, you may want the reverse proxy to talk to the Zulip server over HTTP; this can be secure when the Zulip server is not directly exposed to the public Internet.

After installing the Zulip server as described above, you can configure Zulip to talk HTTP as follows:

  1. Add the following block to /etc/zulip/zulip.conf:

    ini [application_server] http_only = true

  2. As root, run /home/zulip/deployments/current/scripts/zulip-puppet-apply. This will convert Zulip's main nginx configuration file to allow HTTP instead of HTTPS.

  3. Finally, restart the Zulip server, using /home/zulip/deployments/current/scripts/restart-server.

nginx configuration

For nginx configuration, there's two things you need to set up: * The root nginx.conf file. We recommend using /etc/nginx/nginx.conf from your Zulip server for our recommended settings. E.g. if you don't set client_max_body_size, it won't be possible to upload large files to your Zulip server. * The nginx site-specific configuration (in /etc/nginx/sites-available) for the Zulip app. The following example is a good starting point:

server {
        listen                  443 ssl http2;
        listen                  [::]:443 ssl http2;
        server_name             zulip.example.net;

        ssl_certificate         /path/to/fullchain-cert.pem;
        ssl_certificate_key     /path/to/private-key.pem;

        location / {
                proxy_set_header        X-Forwarded-For $proxy_add_x_forwarded_for;
                proxy_set_header        Host $http_host;
                proxy_http_version      1.1;
                proxy_buffering         off;
                proxy_read_timeout      20m;
                proxy_pass              https://zulip-upstream-host;
        }
}

Don't forget to update server_name, ssl_certificate, ssl_certificate_key and proxy_pass with the appropriate values for your installation.

Apache2 configuration

Below is a working example of a full Apache2 configuration. It assumes that your Zulip sits at http://localhost:5080. You first need to make the following changes in two configuration files.

  1. Follow the instructions for Configure Zulip to allow HTTP.

  2. Add the following to /etc/zulip/settings.py: python EXTERNAL_HOST = 'zulip.example.com' ALLOWED_HOSTS = ['zulip.example.com', '127.0.0.1'] USE_X_FORWARDED_HOST = True

  3. Restart your Zulip server with /home/zulip/deployments/current/scripts/restart-server.

  4. Create an Apache2 virtual host configuration file, similar to the following. Place it the appropriate path for your Apache2 installation and enable it (E.g. if you use Debian or Ubuntu, then place it in /etc/apache2/sites-available/zulip.example.com.conf and then run a2ensite zulip.example.com && systemctl reload apache2):

    ```apache ServerName zulip.example.com RewriteEngine On RewriteRule ^ https://%{HTTP_HOST}%{REQUEST_URI} [R=301,L]

    ServerName zulip.example.com

    RequestHeader set "X-Forwarded-Proto" expr=%{REQUEST_SCHEME} RequestHeader set "X-Forwarded-SSL" expr=%{HTTPS}

    RewriteEngine On RewriteRule /(.*) http://localhost:5080/$1 [P,L]

    Require all granted ProxyPass http://localhost:5080/ timeout=300 ProxyPassReverse http://localhost:5080/ ProxyPassReverseCookieDomain 127.0.0.1 zulip.example.com

    SSLEngine on SSLProxyEngine on SSLCertificateFile /etc/letsencrypt/live/zulip.example.com/fullchain.pem SSLCertificateKeyFile /etc/letsencrypt/live/zulip.example.com/privkey.pem SSLOpenSSLConfCmd DHParameters "/etc/nginx/dhparam.pem" SSLProtocol all -SSLv3 -TLSv1 -TLSv1.1 SSLCipherSuite ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384 SSLHonorCipherOrder off SSLSessionTickets off Header set Strict-Transport-Security "max-age=31536000" ```

HAProxy configuration

If you want to use HAProxy with Zulip, this backend config is a good place to start.

backend zulip
    mode http
    balance leastconn
    reqadd X-Forwarded-Proto:\ https
    server zulip 10.10.10.10:80 check

Since this configuration uses the http mode, you will also need to configure Zulip to allow HTTP as described above.

Other proxies

If you're using another reverse proxy implementation, there are few things you need to be careful about when configuring it:

  1. Configure your reverse proxy (or proxies) to correctly maintain the X-Forwarded-For HTTP header, which is supposed to contain the series of IP addresses the request was forwarded through. You can verify your work by looking at /var/log/zulip/server.log and checking it has the actual IP addresses of clients, not the IP address of the proxy server.

  2. Ensure your proxy doesn't interfere with Zulip's use of long-polling for real-time push from the server to your users' browsers. This nginx code snippet does this.

The key configuration options are, for the /json/events and /api/1/events endpoints:

System and deployment configuration

The file /etc/zulip/zulip.conf is used to configure properties of the system and deployment; /etc/zulip/settings.py is used to configure the application itself. The zulip.conf sections and settings are described below.

[machine]

puppet_classes

A comma-separated list of the Puppet classes to install on the server. The most common is zulip::profile::standalone, used for a stand-alone single-host deployment. Components of that include: - zulip::profile::app_frontend - zulip::profile::memcached - zulip::profile::postgresql - zulip::profile::redis - zulip::profile::rabbitmq

If you are using a Apache as a single-sign-on authenticator, you will need to add zulip::apache_sso to the list.

pgroonga

Set to the string enabled if enabling the multi-language PGroonga search extension.

[deployment]

deploy_options

Options passed by upgrade-zulip and upgrade-zulip-from-git into upgrade-zulip-stage-2. These might be any of:

Generally installations will not want to set any of these options; the --skip-* options are primarily useful for reducing upgrade downtime for servers that are upgraded frequently by core Zulip developers.

git_repo_url

Default repository URL used when upgrading from a Git repository.

[application_server]

http_only

If set to non-empty, configures Zulip to allow HTTP access; use if Zulip is deployed behind a reverse proxy that is handling SSL/TLS termination.

nginx_listen_port

Set to the port number if you prefer to listen on a port other than 443.

no_serve_uploads

To enable the the S3 uploads backend, one needs to both configure settings.py and set this to 'true' to configure nginx. Remove this field to return to the local uploads backend (any non-empty value is currently equivalent to true).

queue_workers_multiprocess

By default, Zulip automatically detects whether the system has enough memory to run Zulip queue processors in the higher-throughput but more multiprocess mode (or to save 1.5GiB of RAM with the multithreaded mode). The calculation is based on whether the system has enough memory (currently 3.5GiB) to run a single-server Zulip installation in the multiprocess mode.

Set to true or false to override the automatic calculation. This override is useful both Docker systems (where the above algorithm might see the host's memory, not the container's) and/or when using remote servers for postgres, memcached, redis, and RabbitMQ.

uwsgi_buffer_size

Override the default uwsgi buffer size of 8192.

uwsgi_listen_backlog_limit

Override the default uwsgi backlog of 128 connections.

uwsgi_processes

Override the default uwsgi (Django) process count of 6 on hosts with more than 3.5GiB of RAM, 4 on hosts with less.

[certbot]

auto_renew

If set to the string yes, Certbot will attempt to automatically renew its certificate. Do no set by hand; use scripts/setup/setup-certbot to configure this.

[postfix]

mailname

The hostname that Postfix should be configured to receive mail at.

[postgresql]

effective_io_concurrency

Override PostgreSQL's effective_io_concurrency setting.

listen_addresses

Override PostgreSQL's listen_addresses setting.

random_page_cost

Override PostgreSQL's random_page_cost setting

replication

Set to non-empty to enable replication to enable streaming replication between PostgreSQL servers.

ssl_ca_file

Set to the path to the PEM-encoded certificate authority used to authenticate client connections.

ssl_cert_file

Set to the path to the PEM-encoded public certificate used to secure client connections.

ssl_key_file

Set to the path to the PEM-encoded private key used to secure client connections.

version

The version of PostgreSQL that is in use. Do not set by hand; use the PostgreSQL upgrade tool.

[rabbitmq]

nodename

The name used to identify the local RabbitMQ server; do not modify.

[memcached]

memory

Override the number of megabytes of memory that memcached should be configured to consume; defaults to 1/8th of the total server memory.

[loadbalancer]

ips

Comma-separated list of IP addresses or netmasks of external load balancers whose X-Forwarded-For should be respected.

[http_proxy]

host

The hostname or IP address of an outgoing HTTP CONNECT proxy.

port

The TCP port of the HTTP CONNECT proxy on the host specified above.

listen_address

The IP address that Smokescreen should bind to and listen on. Defaults to 127.0.0.1.